Products-Products-Introduction to Shandong Delitong Bearing Co., Ltd

Spherical roller bearing with relubrication features. This type bearing has many advantages such as: Accommodate misalignment High load carrying capacity Relubrication features Low friction and long service life Increased wear resistance

240xxCA Series

The bearing is double row of Spherical Roller Bearing with C3-loose clearance,shaft mount, cage material is brass . Bearing is in open enclosure and it is relubricatable. Suffixe CA-Spherical roller bearing of C design but with two integral inner ring flanges and machined cage.

1300 Series

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.

2200 Series

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.

2300 Series

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.

Thrust needle roller

Needle roller thrust bearings are fitted with a form-stable cage to reliably retain and guide a large number of needle rollers. Needle roller thrust bearings provide a high degree of stiffness within a minimum axial space. In applications where the faces of adjacent machine components can serve as raceways, needle roller thrust bearings take up no more space than a conventional thrust washer.

52000 Series

Double direction thrust ball bearings type 52000 can withstand axial thrust loads in two directions, and can limit the movement of the shaft and housing in one direction. These bearings have a separable design for easy installation, removal and bearing inspection.

53000 Series

Type 53000 bearings are single direction thrust bearings with spherical housing locating washers to accommodate axial loads in one direction. They must not bear any radial loads. Many components are interchangeable. The shaft washers have ground holes for an interference fit.

53000U Series

53000 U-Bearings are bearings with self-aligning seat washers that can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft. Depending on the bearing series, spherical seat washers have the basic designation U 2, U 3 or U 4, plus two digits indicating the size (eg spherical seat washer U 320 for bearing 53320).

54000 Series

Double direction thrust ball bearings include a shaft washer, two seat washers and two steel ball-cage assemblies. The bearing is a separate type, and each part can be installed independently. Double direction bearings and single direction bearings use the same shaft washer, seat washer and steel ball-cage assembly.

54000U Series

Double direction thrust ball bearings consist of one shaft washer, two housing washers and two ball and cage thrust assemblies. The bearings are separable so that mounting is simple. The various parts can be mounted separately. The housing washers and ball and cage thrust assemblies are identical to those of the single direction bearings. Double direction thrust ball bearings can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. They must not be subjected to radial load.

NJ Series

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which ease of assembly and fitting and axial location.

NU2xx & NU3xx Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller which slides in both directions and is commonly found in motors.

NU10xx EM Series

Four Row

Four-row tapered roller bearings have spacers for adjusting the clearance between the inner and outer rings. The performance is basically the same as that of double-row tapered roller bearings, and the bearing capacity is large. They are used almost exclusively in work roll applications such as rolling mills.

LM.LUU

This type is a metric dimension series widely used in Asia. The long type linear bearing carries heavier load and guides better than the standard type. Containing two units of the standard retainer plate, this type is optimal for locations where a moment load is present and reduces man-hours in installation.

PRODUCT