Welcome to Introduction to Shandong Delitong Bearing Co., Ltd

PRODUCT

Linear motion is the most basic of all motion.A linear-motion bearing or linear slide is a bearing designed to provide free motion in one direction. Linear bearings are divided into two classifications: the rolling linear bearings and the plain linear bearings. Linear bearings are widely used in CNC Machine, 3D printers,sliding doors, and automation settings.

LM.LUU

This type is a metric dimension series widely used in Asia. The long type linear bearing carries heavier load and guides better than the standard type. Containing two units of the standard retainer plate, this type is optimal for locations where a moment load is present and reduces man-hours in installation.

LM.UU

This type is a standard metric dimension series widely used in Asia and other countries. A special synthetic rubber seal is incorporated into both ends or either end of the linear bush, thus to prevent foreign matter from entering the linear bush and minimize leaking of the grease.

LME.LUU

The size of LME.LUU long linear motion bearing is metric version, making the product extensively used in the European countries. This type of standard linear bushings LME.LUU provide low friction on high speed movement, and the shaft diameter is from 8mm to 60mm.

LME.UU

LM/LME linear bushing has a steel outer ring with grooves for a circlip and a polyamide ball retainer with 3 to 6 ball circuits depending on size. On request linear ball bushing are also available in stainless steel. All linear bearings with the designation UU have seals from both sides.

LMK..UU_LMF..UU

They are often used on steel tracks as guides and supports. The shields serve to offer protection to prevent ingress of debris and dust whilst retaining the grease within the bearing.

< 1 >